Scroll down Forthis Month
________
5/31/2022
More Clean Up
________
5/30/2022
I remember those who gave their life, for my freedom. Clean Up Day
________
5/29/2022
Cleaned Up Tool Room
________
5/28/2022
Put Up Lights
________
5/27/2022
Clean Up
________
5/26/2022
Rest
________
5/25/2022
Moved Marble and Put it in Place
________
5/24/2022
Unloaded and Sorted Some of the Paper I got
________
5/23/2022
Finished the Last Garden Bed. Made a Poltis out of CAO3 (Chalk) /(Whiting) and 12% Hydrogen Peroxide.
Put it on the Marble and covered with Plastic for 24 hours the removed plastic and let it dry for 24 hours.
This removed 90% of the stain on the Marble. See picture on May 18 for comparison. Might do it one more
time. Then Sanding to 1000 grit.
________
5/22/2022
Worked in the Garden, Two More Beds Done
________
5/21/2022
Burned Down Fall, and Made Fire Breaks
________
5/20/2022
Fixed the Mower and Then Mowed
________
5/19/2022
Prepared Garden Beds
________
5/18/2022
4 More Hours and some, But Little Change
________
5/17/2022
After 5.5 Hours Marble only 1/3 Done. The Brown is Organic Stain.
This section done, it is a lot whiter than the photo.
________
5/16/2022
Rebuilt Marble Ring Support for Table
________
5/15/2022
Stained Work Table and Put Temporary Top On it, and Moved it to the Kitchen
________
5/14/2022
More Sanding, Removed Wood Plug Screw Covers and Tightened Screws.
Replace Wood Plugs and Painted Inside Table
________
5/13/2022
Started to Work on Marble Work Table, Made from Yellow Pine
________
5/12/2022
More Masking and Painting
________
5/11/2022
Cut Down Dead Trees and Burned Brush
________
5/10/2022
Cutter Frame Painted
________
5/09/2022
Went to the Doctor
________
5/08/2022
Clean Up
________
5/07/2022
Hand Wheel Polished, Painted and Installed
________
5/06/2022
Put 24 Inch Hand Wheel on Lathe to Polish
________
5/05/2022
Took Down Old Lights in Shop
________
5/04/2022
Removed Hand Wheel for Back Gage, Cleaned, Painted and Reinstalled.
________
5/03/2022
Cleaned, Sharpened Cutter Blade and Installed. Cut Paper.
________
5/02/2022
Cleaned and Refurbished and Installed the Cutter Bar.
The One with Slotted Holes for the Cutter Blade.
________
5/01/2022
Cleaned, Refurbished and Painted Cutter Parts. Those are One inch Pins